728x90 AdSpace

  • Latest Post

    Friday, June 24, 2011

    Computer Hardware and Servicing NC II Reviewer

    Computer Hardware Servicing NC II Assessment Free Reviewer

    Below is a reviewer on the skill assessment  exam of those who wanted to get a certificate on Computer Hardware Servicing NC II from Technical Education and Skills Development Authority (TESDA, Philippines).  It is assumed that you have the prior basic knowledge on computer hardware and software operations.  This is not a comprehensive one but provides examples, hints and basic outline  of the exam:

    1.  List of Tools and Materials/Inventory (written): 

    Computer Hardware and Servicing NC II Reviewer
      
    2.           Occupational Health and Safety Procedure (OHS) (written):
     
    1.   Contingency measures during workplace accidents, fire and other emergencies are recognized.
    2. Personal protective equipment are correctly used in accordance with organization OHS procedures and practices.
    3. Hazard/risks in the workplace and their corresponding indicators are identified to minimize or eliminate risk to co-workers, workplace and environment.
    4. Take necessary precautions to protect the components of the computer from damage caused by ESD (Electrostatic Discharge).
    5. Hold the components by the edges and do not touch the IC’s.
    6. Read and follow instructions on the manual carefully.
    7. Do not use excessive force if things don’t quite slip into place.



    3.  Assemble System Unit (manual):

    PROPER ASSEMBLING PROCEDURE:

    1. Prepare the computer case (install power supply, I/O shield and spacers).
    2. Install the drives (DVD, floppy and HDD).
    3. Install the CPU, fan, heat sink and memory module on the motherboard.
    4. Install the motherboard into the casing and expansion cards.
    5. Install the cablings (power connectors, FDD connector, IDE/SATA connector, USB headers and system panel header).
    6. Attach the monitor, keyboard, mouse and plug into a        power source.
    7. Troubleshoot if necessary.
    8. Assemble and install network connection.

    Computer Hardware and Servicing NC II Reviewer


    4.  Install Operating Systems (OS- XP/98, dual boot), Device Drivers, LAN Cable (manual).

    Extensive procedures on dual/triple boot operating systems (OS) installation can be found on this site homepage.ntlworld.com/mosaddique/.  The type of operating systems to be installed might change overtime.

    For LAN cable color coding, memorize the pairings below:


    Computer Hardware and Servicing NC II Reviewer


    5.    Configure and Print (manual):

    1.       Click on the Start menu, then click on Control Panel
    2.       When the Control Panel window opens you will see items in either Category View (continue         with step #3) or Classic View (skip to item #4)
    3.       Find and double-click on the Network and Internet Connection icon.
    4.       Next, find and double-click on the Network Connections icon, a window will open with all           network connections available on the computer (wired and wireless)
    5.       Find the network connection you want to manually configure, right-click on it and select    Properties from the pop-up menu
    6.       In the Connection Properties window, under the section labeled This connection uses the            following items: find the Internet Protocol (TCP/IP) item and double-click it.
    7.       A new window will open, select the second radio button which is labeled Use the following IP       address
    8.       Enter the appropriate IP address (192.168.0.1); subnet mask (usually 255.255.255.0); and           gateway (the router       or proxy server address)
    9.       The next part of the windows will now have a radio button selected which is labeled Use the         following DNS server addresses
    10.   If you need to access the Internet, enter the DNS addresses provided by your ISP; if you do not   have that information you can use the OpenDNS server. Their DNS addresses are: 208.67.222.222 and 208.67.220.220
    11.   After entering the required information, click the OK button twice and close the Control Panel window.
    Computer Hardware and Servicing NC II Reviewer



    Changing Workgroup and Computer Name
     - Start > Settings > Control Panel > System > Computer Name Tab > Change Tab
                            >Type New Computer Name and Workgroup > OK..OK..OK..Restart

    Installing Network Printer
     - Start > Settings > Control Panel > Printers and Faxes > Add Printer (Printers Tasks) > (Add Printer Wizard) Next > Select “A Network Printer, or …..” > Next      > Browse Printer > Next > Select Installed Network Printer > Next >Yes..Finish!
                            Note: Turn-off your firewall before installing network printer.

    File/Folder Sharing
     - Right-Click Folder to Share > Properties > Sharing Tab > Network Sharing and Security (Click “If you understand the security Risk….”) > Just Enable Sharing    > OK > Select Share this folder on the network > OK

    Sharing Printer
    Start > Settings > Control Panel > Printers and Faxes > Right-click Installed Printer > Sharing > Share this Printer > OK 

    6.  Questioning/Interview  (oral):

    Most of the questions will be on troubleshooting but anything around the subject matter can be asked.  You also need to master the parts of the computer particularly of the Main Circuit Board or the Mother Board and their specific functions, cable color-coding as shown above.
    Computer Hardware and Servicing NC II Reviewer
     
    central processing unit (CPU) - Interprets and carries out basic instructions that operate a computer

    Heat sink—component with fins that cools processor

    random access memory (RAM) - Memory chips that can be read from and written  to by processor.  Also called main memory or primary storage.  Most RAM is volatile, it is lost when computer’s power is turned off.

    read-only memory (ROM) - Memory chips that store permanent data and instructions.  Nonvolatile memory, it is not lost when computer’s power is turned off.

    basic input and output system (BIOS) -  the first program to run when you turn on your computer.  It is stored in a ROM chip on the motherboard.

    complementary metal-oxide semiconductor memory (CMOS) - Stores date, time, and  computer’s startup information.  Maintained by a small battery after you turn the computer off.

    adapter card - Enhances system unit or provides connections to external devices called peripherals.  Also called an expansion card.

    expansion slot - An opening, or socket, on the motherboard that can hold an adapter card

    Port connects external devices to system unit
    Newer Post
    Previous
    This is the last post.
    • Blogger Comments
    • Facebook Comments

    0 comments:

    Post a Comment

    Item Reviewed: Computer Hardware and Servicing NC II Reviewer Rating: 5 Reviewed By: Marcelo Austria
    Scroll to Top